产品中心
产品介绍
过滤调节器
额定输入压力：140PSI
环境及流体温度：5~60°C
过滤精度：25μm(5.50μm内的范围公差可接受)
供应压力：输入压力为0.7Mpa，输出时为0.5Mpa
螺纹规格：NPT、PT或BSPP
阀门类型：带溢流型
容器材料可选择树脂或铝压铸件
放水功能可选自动或手动
| Container Material: Aluminum Die Casting | ||||||
| Item# Manual Drian | Item# Auto Drain | Port Size | Gauge Port | Flow Capacity | Regulating Range | Auto Drain Type |
| (L/min) | ||||||
| APHM20-12 | APHM20-12D | 1/8" | 1/8" | 500 | 0.05~0.85Mpa | Lever Type Auto Drain |
| APHM20-25 | APHM20-25D | 1/4" | (0.5~8.5kgf/cm2) | |||
| APHS30-25 | APHS30-25D | 1/4" | 2000 | (7.25psi~123psi) | ||
| APHS30-33 | APHS30-33D | 3/8" | ||||
| APHL40-33 | APHL40-33D | 3/8" | 1/4" | 4000 | Float Type Auto Drain | |
| APHL40-50 | APHL40-50D | 1/2" | ||||
| APHL40-75 | APHL40-75D | 3/4" | 4500 | |||
| APHL50-75 | APHL50-75D | 3/4" | 5500 | |||
| APHL50-1 | APHL50-1D | 1" | ||||
| Container Material: Polycarbonate | ||||||
| (With Steel Protective Cover On APWS30-25 To APWL50-1) | ||||||
| Item# Manual Drain | Item# Auto Drain | Port Size | Gauge Port | Flow Capacity | Regulating Range | Auto Drain Type |
| (L/min) | ||||||
| APWM20-12 | APWM20-12D | 1/8" | 1/8" | 500 | 0.05~0.85Mpa | Lever Type Auto Drain |
| APWM20-25 | APWM20-25D | 1/4" | (0.5~8.5kgf/cm2) | |||
| APWS30-25 | APWS30-25D | 1/4" | 2000 | (7.25psi~123psi) | ||
| APWS30-33 | APWS30-33D | 3/8" | ||||
| APWL40-33 | APWL40-33D | 3/8" | 1/4" | 4000 | Float Type Auto Drain | |
| APWL40-50 | APWL40-50D | 1/2" | ||||
| APWL40-75 | APWL40-75D | 3/4" | 4500 | |||
| APWL50-75 | APWL50-75D | 3/4" | 5500 | |||
| APWL50-1 | APWL50-1D | 1" | ||||
产品关键词：
过滤调节器
